Dr. Frank Andress Girot Mata

Ikerbasque Research Professor
(French)

Doctor in Materials and Process Science from the University of Bordeaux (1987).
Authorisation to manage Research for the University of Bordeaux (1996).
Research line: Research Line: Optimization and simulation of manufacturing processes; Application of nano-technologies to manufacturing processes
Has joined the department of Mechanics at the Escuela Técnica Superior of Engineering in Bilbao, UPV-EHU.
Comes from the post of head of department of Processes and Materials at Arts et Métiers ParisTech (ENSAM campus in Bordeaux).

Publications

2011

Calamaz M., Coupard D., Nouari M., Girot F (2011)
Numerical analysis of chip formation and shear localisation processes in machining the Ti-6Al-4V titanium alloy
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

2010

D. ILIESCU, D. GEHIN, I. IORDANOFF, F. GIROT, M. E. GUTIERREZ (2010)
A discrete element method for the simulation of CFRP cutting
Composites Science and Technology

Calamaz, M; Coupard, D; Girot, F (2010)
NUMERICAL SIMULATION OF TITANIUM ALLOY DRY MACHINING WITH A STRAIN SOFTENING CONSTITUTIVE LAW
MACHINING SCIENCE AND TECHNOLOGY

2009

M. Calamaz, J. Limido, M. Nouari, C. Espinosa, D. Coupard, M. Salaün, F. Girot, R. Chieragatti (2009)
Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials
Int. Journal of Refractory Metals & Hard Materials

G. List, D. Géhin, A. Kusiak, J.L. Battaglia, F. Girot (2009)
Heat flux and temperature at the tool-chip interface in dry machining of aeronautic aluminium alloy
Journal of Manufacturing Technology Research

2008

D. Iliescu, D. Géhin, M. Nouari and F. Girot (2008)
Damage modes of the aeronautic multidirectional carbon/epoxy composite T300/914 in machining
Int. J. Materials and Product Technology

M. Calamaz, D. Coupard and F. Girot (2008)
A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
International Journal of Machine Tools & Manufacture

M. Calamaz, J. Limido, M. Nouari, C. Espinosa, D. Coupard, M. Salaün, F. Girot and R. Chieragatti (2008)
Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials
Int. Journal of Refractory Metals & Hard Materials

Mohammed Nouari, Madalina Calamaz and Franck Girot (2008)
Mécanismes d’usure des outils coupants en usinage à sec de l’alliage de titane aéronautique Ti–6Al–4V
C. R. Mecanique

In press

D. ILIESCU, D. GEHIN, M. E. GUTIERREZ, F. GIROT (2010)
Tool wear during drilling of CFRP
International Journal of Machine Tools and Manufacture

Books and book chapters

Published

F. Girot, L. N. López de Lacalle, A.l Lamikiz, D. Iliescu, M. E. Gutiérrez (2010)
Type: book
Book: Machining Composite Materials
Chapter: Chapter 2 : Machinability Aspects of Polymer Matrix Composites
Page numbers: 39-111
ISBN: 978-1-84821-170-4 | London | Editors: John Wiley & sons
Daniel Iliescu, Asier Fernandez, Mª Esther Gutierrez-Orrantia, Luis Norberto López De Lacalle, Franck Girot (2010)
Type: chapters
Book: ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES
Chapter: Modeling And Tool Wear In Routing of CFRP
Page numbers: 1645-1650
ISBN: 978-0-7354-0871-5 | New York | Editors: American Institute of Physics
F. Girot, M. E. Gutiérrez-Orrantia, M. Calamaz, and D. Coupard, (2010)
Type: chapters
Book: ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES
Chapter: Modeling and Adhesive Tool Wear in Dry Drilling of Aluminum Alloys
Page numbers: 1639-1644
ISBN: 978-0-7354-0871-5 | New York | Editors: American Institute of Physics
D. Lacombe, M. E. Gutierrez-Orrantia, D. Coupard, S. Tcherniaeff, and F. Girot (2010)
Type: book
Book: ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES, Vol. 1315
Chapter: Pearson’s Functions to Describe FSW Weld Geometry
Page numbers: 953-960
ISBN: 978-0-7354-0871-5 | New York | Editors: American Institute of Physics
S. Tcherniaeff, F. Girot, I. Iordanoff (2005)
Type: book
Book: Materials Science Forum, Volume: 638-642
Chapter: Modeling environment of friction stir joining for AA2017T351 plates in butt joint
Page numbers: 1494-1499
ISBN: 638-642.1494 | Berlin | Editors: Chandra T; Wanderka N; Reimers W; et al.

Ikerbasque. Basque Foundation for Science