Frank Girot

Ikerbasque Research Professor, EHU

Department of Mechanics at the Escuela Técnica Superior of Engineering in Bilbao.

Research line:

Optimization and simulation of manufacturing processes; Application of nano-technologies to manufacturing processes

Authorisation to manage Research for the University of Bordeaux (1996)

Doctor in Materials and Process Science from the University of Bordeaux (1987)

2023

Article / Novel Assessment Methodology for Laser Metal Deposition of New Metallic Alloys

Materials

Xabier Cearsolo, Mario Arrue, Maitane Gabilondo, Jon Mikel Sanchez, Haize Galarraga, Maider Garcia de Cortazar, Franck Girot Mata

Article / Impact of In-Soil ageing effect on PLA printed parts tensile properties

Polymers

Ana P. Valerga , Severo R. Fernandez-Vidal, Franck Girot

Article / Effects of Mn addition, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy

Heliyon

Jon Mikel Sanchez, Maribel Arribas, Haize Galarraga, Maider Garcia de Cortazar, Marco Ellero, Franck Girot

Article / Wear of Abrasive Tools during CMC Machining

Machines

Franck Andrés Girot Mata, Mario Alfredo Renderos Cartagena, Unai Alonso Pinillos and Borja Izquierdo Aramburu

Article / Bioinspired Design for Lightweighting and Vibration Behavior Optimization in Large-Scale Aeronautical Tooling: A Comparative Study

Bioinspired Design for Lightweighting and Vibration Behavior Optimization in Large-Scale Aeronautical Tooling: A Comparative Study

Ignacio Laraudogoitia Blanc, Christian Hamm, Maider García de Cortázar, Nils Kaiser, Oleksander Savysko and Franck Andrés Girot Mata

Article / Numerical simulations of thixotropic semi-solid aluminium alloys in open-rotor and rotor–stator mixers

Journal of Non Newtonian Fluid Mechanics

Garcia-Beristain, I.; Figueroa-Landeta, M.; López-Aguilar, J.E.; de Cortazar, M.G.; Girot, F.; Ellero, M.

Article / Thermomechanics of Cosserat medium: modeling adiabatic shear bands in metals

Continuum Mechanics and Thermodynamics

Russo, R.; Forest, S.; Girot Mata, F.A.

Article / Impact of In-Soil Ageing Effect on PLA Printed Parts Tensile Properties

Polymers

Valerga, A.P.; Fernandez-Vidal, S.R.; Girot, F.

Article / Effects of Mn addittion, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy

Heliyon

Sanchez, J.M.; Arribas, M.; Galarraga, H.; Garcia de Cortazar, M.; Ellero, M.; Girot, F.

Article / Design and Validation of New Torsion Test Bench for Intermediate Strain Rate Testing

Experimental Mechanics

Bhujangrao, T.; Froustey, C.; Darnis, P.; Veiga, F.; Guérard, S.; Mata, F.G.

2022

Article / Regularization of shear banding and prediction of size effects in manufacturing operations: A micromorphic plasticity explicit scheme

International Journal of Material Forming

Raffaele Russo; Vikram Phalke; Didier Croizet; Mustapha Ziane; Samuel Forest; Franck Andres Mata Girot; Hyung-Jun Chang; Arjen Roos

Article / Numerical Modeling of the Influence of Nanometric Ceramic Particles on the Nucleation of AlSi10MnMg Alloy

Metals

Jimenez, Ane, Mikel Sanchez, Jon, Girot, Franck, Renderos, Mario,Egizabal, Pedro

Article / Numerical Modeling of the Influence of Nanometric Ceramic Particles on the Nucleation of AlSi10MnMg Alloy

Metals

Jimenez, A.; Sanchez, J.M.; Girot, F.; Renderos, M.; Egizabal, P.

2021

Article / Experimental characterization of the AA7075 aluminum alloy using hot shear compression test

Archives of Civil and Mechanical Engineering

Bhujangrao, T.; Veiga, F.; Froustey, C.; Guérard, S.; Iriondo, E.; Darnis, P.; Mata, F.G.

2020

Chapter / Laser Cladding of Metals

Pasquale Cavaliere (Editor), Springer, New York, USA

M. Renderos, A. Torregaray, M.E. Gutierrez-Orrantia, E. Lacoste, F. Girot Mata

Article / Experimental characterization of the AA7075 aluminum alloy under hot shear compression loading

Metals

Trunal Bhujangrao, Catherine Froustey, Fernando Veiga, Sandra Guérard, Philippe Darnis, Edurne Iriondo, Franck Girot Mata

Article / A review on strain gradient plasticity approaches in simulation of manufacturing processes

Journal of Manufacturing and Materials Processes, 2020, 4, 87

Raffaele Russo, Franck Andrés Girot Mata, Dimitri Jacquin and Samuel Forest

Article / Thermodynamically-Consistent Cosserat: Calibration of the Characteristic Lengths through Simulations of Hat-Shaped Specimens Under Compression

Continuum Mechanics and Thermodynamics

Raffaele Russo, Samuel Forest, Franck Andres Girot Mata

Article / High-temperature mechanical properties of IN718 alloy: Comparison of additive manufactured and wrought samples

Crystals

Bhujangrao, T.; Veiga, F.; Suárez, A.; Iriondo, E.; Mata, F.G.

Article / Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts

Rapid Prototyping Journal

Valerga Puerta, A.P.; Fernandez-Vidal, S.R.; Batista, M.; Girot, F.

Article / On the relationship between mechanical properties and crystallisation of chemically post-processed additive manufactured polylactic acid pieces

Polymers

Valerga, A.P.; Fernandez-Vidal, S.R.; Girot, F.; Gamez, A.J.

Review / A Review on Strain Gradient Plasticity Approaches in Simulation of Manufacturing Processes

Journal of Manufacturing and Materials Processing

Russo, R.; Mata, F.A.G.; Forest, S.; Jacquin, D.

Review / Review of intermediate strain rate testing devices

Metals

Bhujangrao, T.; Froustey, C.; Iriondo, E.; Veiga, F.; Darnis, P.; Mata, F.G.

2019

Chapter / Additive and Subtractive Manufacturing: Emergent Technologies

J. Paulo Davim (Editor), Berlin, Boston: De Gruyter

Moisés Batista, Ana Pilar Valerga, Jorge Salguero, Severo Raul Fernandez-Vidal, Franck Girot

Article / Defect Analysis and Detection of Cutting Regions in CFRP Machining Using AWJM

Materials

Pedro F. Mayuet Ares, Franck Girot Mata, Moises Batista Ponce, Jorge Salguero Gómez

Article / Mechanism-based wear models for plastic injection moulds

Wear

Zabala, B.; Fernandez, X.; Rodriguez, J.C.; López-Ortega, A.; Fuentes, E.; Bayón, R.; Igartua, A.; Girot, F.

Article / Wear mechanisms and wear model of carbide tools during dry drilling of CFRP/TiAl6V4 stacks

Materials

Pinillos, U.A.; Vidal, S.R.F.; Calamaz, M.; Mata, F.A.G.

Article / Influence of flute number and stepped bit geometry when drilling CFRP/Ti6Al4V stacks

Journal of Manufacturing Processes

Alonso, U.; Calamaz, M.; Girot, F.; Iriondo, E.

2018

Article / Post-processing of PLA parts after additive manufacturing by FDM technology

Dyna (Spain)

Valerga-Puerta, A.P.; Batista-Ponce, M.; Fernández-Vidal, S.R.; Girot-Mata, F.

Article / Influence of PLA filament conditions on characteristics of FDM parts

Materials

Valerga, A.P.; Batista, M.; Salguero, J.; Girot, F.

Article / Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Tchein, G.J.; Jacquin, D.; Coupard, D.; Lacoste, E.; Girot Mata, F.

Article / Multiparametric study of Leidenfrost point and wettability of lubricants on high-pressure die-casting dies

International Journal of Thermal Sciences

Zabala, B.; Igartua, A.; Scarpis, V.; Timelli, G.; Girot, F.; Nevshupa, R.

2017

Article / Taladrado de materials compuestos:problemas, prácticas recomendadas y técnicas avanzadas

DYNA

UNAI ALONSO PINILLO, FRANCK GIROT MATA, ROBERTO POLVOROSA TEIJEIRO, LUIS NORBERTO LOPEZ DE LA CALLE MARCAIDE

Article / Reconditioning procedure of Inco 718 powder for LMD additive manufacturing process

Materials Characterization

Mario Renderos, Amaia Torregaray, Esther Gutierrez, Aitzol Lamikiz, Nicolas Saintier, Franck Girot

Article / Microstructure characterization of recycled IN718 powder and resulting laser clad material

Materials Characterization

Renderos, M.; Torregaray, A.; Gutierrez-Orrantia, M.E.; Lamikiz, A.; Saintier, N.; Girot, F.

Article / Friction and wear of a piston ring/cylinder liner at the top dead centre: Experimental study and modelling

Tribology International

Zabala, B.; Igartua, A.; Fernández, X.; Priestner, C.; Ofner, H.; Knaus, O.; Abramczuk, M.; Tribotte, P.; Girot, F.; Roman, E.; Nevshupa, R.

Article / New analytical model for delamination of CFRP during drilling

Journal of Materials Processing Technology

Girot, F.; Dau, F.; Gutiérrez-Orrantia, M.E.

2016

Article / An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations

International Journal of Advanced Manufacturing Technology

Alberdi, A.; Artaza, T.; Suárez, A.; Rivero, A.; Girot, F.

2015

Article / Wear of form taps in threading of steel cold forged parts

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Landeta, J.F.; Valdivielso, A.F.; López de Lacalle, L.N.; Girot, F.; Pérez Pérez, J.M.

2014

Article / High performance form tapping of cold forging steel

CIRP Annals - Manufacturing Technology

Fernández Landeta, Javier; Fernández Valdivielso, Asier; Girot, Franck, López de Lacalle, L.N.

Article / Economical and ecological alternatives to conventional drilling of CFRP/Ti6Al4V

CIRP Annals - Manufacturing Technology

Begoña de Zarate Knorr, Lorea Zuazo, Franck Girot, Amaia Alberdi, Mª Esther Gutierrez-Orrantia

Article / Drill simulation using a CAD parametric method

Journal of Computing and Information Science in Engineering

Arnault Morain, Franck Girot, Mª Esther Gutierrez-Orrantia

2013

Article / Internal characterization and hole formation mechanism in the laser percussion drilling process

International Journal of Machine Tools and Manufacture

Arrizubieta, I.; Lamikiz, A.; Martínez, S.; Ukar, E.; Tabernero, I.; Girot, F.

Article / Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks

International Journal of Advanced Manufacturing Technology

Montoya, M.; Calamaz, M.; Gehin, D.; Girot, F.

Article / Experimental study and modeling of tool wear during drilling and trimming of CFRP

Revue des Composites et des Materiaux Avances

Girot, F.; Iliescu, D.; Valdivieso, A.F.; Gutiérrez-Orrantia, M.E.; De Lacalle, L.N.L.

Article / Analysis of coating performances in machining titanium alloys for aerospace applications

International Journal of Machining and Machinability of Materials

Nouari, M.; Calamaz, M.; Haddag, B.; Girot, F.

2010

Book / Machining Composite Materials

John Wiley & sons

F. Girot, L. N. López de Lacalle, A.l Lamikiz, D. Iliescu, M. E. Gutiérrez

Book / ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES, Vol. 1315

American Institute of Physics

D. Lacombe, M. E. Gutierrez-Orrantia, D. Coupard, S. Tcherniaeff, and F. Girot

Chapter / ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES

American Institute of Physics

Daniel Iliescu, Asier Fernandez, Mª Esther Gutierrez-Orrantia, Luis Norberto López De Lacalle, Franck Girot

Chapter / ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES

American Institute of Physics

F. Girot, M. E. Gutiérrez-Orrantia, M. Calamaz, and D. Coupard,

Article / Tool wear during drilling of CFRP

International Journal of Machine Tools and Manufacture

D. ILIESCU, D. GEHIN, M. E. GUTIERREZ, F. GIROT

Article / Modeling and tool wear in drilling of CFRP

International Journal of Machine Tools and Manufacture

Iliescu, D.; Gehin, D.; Gutierrez, M.E.; Girot, F.

Article / A discrete element method for the simulation of CFRP cutting

Composites Science and Technology

Iliescu, D.; Gehin, D.; Iordanoff, I.; Girot, F.; Gutiérrez, M.E.

2008

Article / Damage modes of the aeronautic multidirectional carbon/epoxy composite T300/914 in machining

Int. J. Materials and Product Technology

D. Iliescu, D. Géhin, M. Nouari and F. Girot

Article / A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Tiâ€“6Alâ€“4V

International Journal of Machine Tools & Manufacture

M. Calamaz, D. Coupard and F. Girot

Article / Mécanismes dâ€™usure des outils coupants en usinage Ã sec de lâ€™alliage de titane aéronautique Tiâ€“6Alâ€“4V

C. R. Mecanique

Mohammed Nouari, Madalina Calamaz and Franck Girot

2005

Book / Materials Science Forum, Volume: 638-642

Chandra T; Wanderka N; Reimers W; et al.

S. Tcherniaeff, F. Girot, I. Iordanoff

2024

Conference Paper | Innovative Tooling Solutions for Aircraft Assembly: A Case Study on the Development of Reconfigurable and Lightweight Fixtures

Lecture Notes in Mechanical Engineering - Conference Paper

Laraudogoitia, I.; Ojeda, I.; Renderos, M.; Iriondo, E.; de Cortázar, M.G.; Girot, F.

Conference Paper | Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures

Lecture Notes in Mechanical Engineering - Conference Paper

Ojeda, I.; Laraudogoitia, I.; Renderos, M.; Iriondo, E.; Alonso, U.; Girot, F.

2023

Conference paper | Soluciones avanzadas para herramientas flexibles para el ensamblaje de aeronaves: estructuras de celosía o reticulares

Ibai Ojeda, Ignacio Laraudogoitia, Mario Renderos, Edurne Iriondo, Unai Alonso, Franck Girot

Conference paper | INFLUENCE OF IMPACT SPEED ON THE QUALITY OF RIVETED LAP JOINTS OF COMPOSITE/METAL STACKS

IBAI OJEDA, BILAL EL MOUSSAOUI, EDURNE IRIONDO, FRANCK ANDRES GIROT

Conference paper | Soluciones avanzadas para herramientas flexibles para el ensamblaje de aeronaves: diseño generativo de columnas de ensamblaje

Ignacio Laraudogoitia, Ibai Ojeda, Mario Renderos, Edurne Iriondo, Maider García de Cortázar, Franck Girot

Conference paper | INFLUENCE OF CUTTING PARAMETERS ON ABRASIVE MACHINING OF C/SIC CERAMIC MATRIX COMPOSITE

EDGARDO IRAZU, BORJA IZQUIERDO, UNAI ALONSO, FRANCK GIROT

Conference paper | END-TO-END BIOINSPIRED LIGHTWEIGHT STRUCTURE MANUFACTURING-ORIENTED DESIGN, VALIDATION, AND MANUFACTURING WITH ADVANCED METHODS

IGNACIO LARAUDOGOITIA BLANC, MAIDER GARCÍA DE CORTÁZAR, FRANCK ANDRÉS GIROT MATA

Conference paper | 42CrMo4 Steel Flow Behavior Characterization for High Temperature Closed Dies Hot Forging in Automotive Components Applications

O. Bilbao, I. Loizaga, F.A. Girot, A. Torregaray

Conference Paper | End-to-end bioinspired lightweight structure manufacturing-oriented design, validation, and manufacturing with advanced methods

Advances in Science and Technology - Conference Paper

Blanc, I.L.; De Cortazar, M.G.; Mata, F.G.

2021

Conference Paper | Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel

Minerals Metals and Materials Series - Conference Paper

Rodriguez-Barrio, N.; Iriondo, E.; Jouaffre, D.; Girot, F.A.

Oral presentation | Problemática de la soldadura por solape de materiales disimiles: Aplicación a aleaciones de aluminio con acero

XXIII Congreso Nacional de Ingeniería Mecánica, Jaén, October 20-22, 2021 - Oral presentation

N. Rodriguez-Barrio, A. Torregaray Laruscain, E. Iriondo Plaza, M. Touzet-Cortina

Oral presentation | Pultsu elektromagnetikoen bidezko errematxaketa eta karbono-zuntzean eta aluminiozko aleazioetan dituen aplikazioak

Materialen Zientzia eta Teknologia V. Kongresua, Bilbo 2021. - Oral presentation

I. Ojeda, E. Iriondo, J.L. Barrou eta F. Girot

Oral presentation | Biomimetika, naturan aurkitutako egiturak ingeniaritzako diseinuetan aplikatuta

Materialen Zientzia eta Teknologia V. Kongresua, Bilbo 2021. - Oral presentation

I. Laraudogoitia, M. García de Cortazar, N. Perry eta F. Girot

2019

Oral presentation | A Predictive Model to Estimate the Energy Requirements for Electromagnetic (EM) Springback Calibration of DP600 and TRIP700 profiles

NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, S-11: Impulse Forming and Welding - Oral presentation

Edurne Iriondo, José Luis Alcaraz, Unai Alonso, Franck Girot

Oral presentation | THERMODYNAMICALLY CONSISTENT COSSERAT FRAMEWORK: OVERCOMING LOCAL MESH DEPENDENCY IN SIMULATIONS OF HAT-SHAPED SPECIMENS UNDER COMPRESSION

29th Edition of the International Workshop on Computational Mechanics of Materials - Oral presentation

Raffaele Russo, Samuel Forest, Franck Girot Mata, Dimitri Jacquin

2018

Oral presentation | CW tool wear in drilling of CFRP/metal stacks

MUGV & Manufacturing’ 21 - Oral presentation

Unai ALONSO PINILLOS, Franck GIROT MATA, Severo Raúl FERNÁNDEZ VIDAL, Moisés BATISTA PONCE, Madalina CALAMAZ, Mª Esther GUTIÉRREZ-ORRANTIA

2017

Conference Paper | An overview on European Manufacturing research visions and roadmaps as an answer to economical and societal challenges and opportunities

Procedia Manufacturing - Conference Paper

Bueno, R.; Girot, F.; Gutiérrez-Orrantia, M.E.

2016

Oral presentation | Evaluation HPDC Lubricant Spraying for Improved Cooling and Die Protection

LUBMAT Conference - Oral presentation

B. Zabala, A. Igartua, C. Raone, G. Timelli, F. Bonollo, V. Scarpis, M. Peggiato, F. Girot

2015

Oral presentation | SOM/SEM based characterization of internal delaminations of CFRP samples machined by AWJM

THE MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, MESIC 2015 - Oral presentation

Mayuet, P. F.; Girot, F.; Lamikiz, A.; et al.

2014

Oral presentation | Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy

17th Conference of the European-Scientific-Association-on-Material-Forming (ESAFORM) - Oral presentation

Montoya, Maxime; Calamaz, Madalina; Gehin, Daniel; Girot, Franck

2013

Invited talk | Mecanizado de piezas en materiales compuestos

19° Congreso de Máquinas-Herramienta y Tecnologias de Fabricación - Invited talk

F. Girot

Invited talk | Machining of composite materials

Jornadas Doctorado de Fabricación - Invited talk

F. Girot,

Invited talk | Mecanizado de Materiales Compuestos de Uso Estratégico Aeronáutico

Jornadas en Ingeniería de Fabricación Aeronáutica - Invited talk

F. Girot,

2012

Conference Paper | Chip/tool interaction during dry machining of the TA6V alloy

Advanced Materials Research - Conference Paper

Calamaz, M.; Coupard, D.; Gutiérrez-Orrantia, M.E.; Bega, J.; Girot, F.

Oral presentation | Drilling of CFRP/Al stacks

9th International Conference on High Speed Machining - Oral presentation

Montoya M., Calamaz M., Gehin D., Girot F.

2010

Conference Paper | Pearson's functions to describe FSW weld geometry

AIP Conference Proceedings - Conference Paper

Lacombe, D.; Gutierrez-Orrantia, M.E.; Coupard, D.; Tcherniaeff, S.; Girot, F.

Conference Paper | Modeling and adhesive tool wear in dry drilling of aluminum alloys

AIP Conference Proceedings - Conference Paper

Girot, F.; Gutiérrez-Orrantia, M.E.; Calamaz, M.; Coupard, D.

Conference Paper | Modeling and tool wear in routing of CFRP

AIP Conference Proceedings - Conference Paper

Iliescu, D.; Fernandez, A.; Gutiérrez-Orrantia, M.E.; Lopez De Lacalle, L.N.; Girot, F.